Starfield:Probe Calibration Protocol

Book Information
ID	00224A7C
Editor ID	MQ207C_Nishina02_CalibrationTestProtocol
	0		0
Type	Note
Related to	Entangled: Investigate the distress call from Nishina Research Station and recover Artifact LAMBDA.
Locations
Found in the following locations:  Nishina Research Station (map), on the body of Rafael Aguerro in the original universe.

Probe Calibration Protocol

Instructions on how to calibrate the research probe at Nishina Research Station.

---

1. Ensure all Power Interlocks are engaged.
2. On the Lab Control Computer, initiate Degaussing.
3. Toggle the indicated Power Interlocks off, then back on, to degauss.
4. Verify that all Power Interlocks have been successfully degaussed.
5. Once all Interlocks have been degaussed, initiate Frequency Calibration.

- If the system has not been fully degaussed, this will fail. If it does, restart.

- If any Interlock is disengaged, this procedure will abort. If it does, restart.

6. Select the desired output frequency.
7. Verify that the intake frequency is stable and meets experimental parameters.
8. Activate the Primary Calibration Control on the front control console.