Starfield:Console

From Starfield Wiki
Jump to: navigation, search
This page or section is incomplete. You can help by adding to it.
All codes need to be rechecked for Starfield. If a code is no longer present, it needs to be removed.
For more information, see the help files, the style guide, and this article's talk page.

The console is a powerful in-game tool available to PC players. From the console it is possible, while playing the game, to enter commands that will alter most aspects of gameplay, and it is also possible to obtain detailed information about NPCs, creatures, and other items in the game.

There are no dragons in Starfield. Someone should probably remove the part that talks about dragons (and beheading, since Bethesda have made Starfield PG 13 unlike their previous games).

General Information[edit]

The console can be accessed in-game by toggling the "tilde key" (the actual key can be ~, `, º, ¬, |,^, \, §, ², etc., depending on your keyboard layout), found near the 1 and Esc keys on most keyboards. The console prompt will appear in the lower left-hand corner of your screen. The console can also be used as a pause function during scenes or dialogue that cannot otherwise be paused. You can scroll the console output using the Page Up and Page Down keys. Console commands are not case-sensitive; for example, entering any of tai or TAI or TaI will toggle AI. After you type a command, press the Enter key to activate it. You will see the command you just entered displayed above the input area. Multiple commands can be entered at once if they are seperated by a semicolon, followed by a space. For example, running the command SetGS fDiffMultHPByPCVE 100 ; setgs fDiffMultHPByPCE 100 would be the same as running SetGS fDiffMultHPByPCVE 100 followed by setgs fDiffMultHPByPCE 100.

Many commands are targeted: this means that you may use player.command to affect the player character; for example, type player.setav carryweight 1000 will set the Player's Carry Weight at 1000. Or, you may want to target the NPC/actor, by first typing prid <RefID>, Enter. Then, type the command by itself, setav carryweight 1000, to affect the NPC, specified by <RefID> (Note: including the zeroes at the beginning of the RefID when targeting NPCs may produce a "command not found" error. That can be evaded though by placing the RefID in quotes).

You may also target an NPC or object in the console by clicking on them, and then run command to affect the NPC or object. When an NPC or object is targeted in this way, their hex code (RefID) will be displayed at the top of the console. For example, to unlock a door, open the console, click on the door so it is the active object in the console (its RefID is shown at the top of the screen), then type unlock. When multiple objects overlap, use the mouse wheel to scroll through different RefIDs until the correct one is selected. When playing on multiple monitors, the cursor will display in the secondary monitor but clicking it will select the object in the same area of the primary monitor. Note that a complete list of objects and their RefID can be obtained by running save funclist 1 and navigating to the "ACHRs" column.

Commands which are abbreviated (for example: tai) can also be run by using their full name; thus, ToggleAI is synonymous with tai, and GetActorValue is synonymous with getav. In most cases, the long command is an obvious progression from the abbreviation. Also, most SetSomething commands have a counterpart GetSomething, even if the counterpart isn't shown here.

Some commands require a form ID. Most articles on objects provide the ID or IDs for those items. In addition, the Help command can be used to locate IDs. Help "Eon" 0 would provide a list of all game objects with Eon in their names. This can be used for items, powers, perks, and more.

Stop hand.svgIf you don't know what you're doing, using console commands can cause your game to malfunction! Executing the wrong command can cause your game to stop working normally; furthermore, you may not become aware of such malfunctions right away, and you may not be able to trace their cause. They can cause problems like making quests impossible to complete, altering your game's display, all kinds of game behaviors, your ability to play your character, and your ability to play the game at all. Solutions are not always easy, and may involve losing saved games or reinstalling your game.

Create and archive a permanent saved game before using the console. (This mitigates only some kinds of risks.) If you need to use the console to fix a glitch, try to use the least-powerful command possible.

If you need help in repairing a console-caused issue, you may see if someone in this wiki's Discord server has a suggestion. You may not get any kind of answer right away, or a solution at all. You might also try asking a question on this article's talk page with the same idea: you may or may not receive a timely reply to your question or problem, and you may not receive a solution at all.

Accessing the Console with Non-US Keyboards[edit]

If you are using a non-US keyboard, the tilde (~) / grave accent (`) key might not work, or there may be no key with such markings. Often, the correct key to use is the key below Esc and above Tab (), where the tilde/grave key is on a US keyboard. See the following table for specifics:

Keyboard Key Notes
Arabic ذ
Canadian - French `
Danish ½
Finnish
Swedish
ö
French % To open the console on a French keyboard, you must use the % / ù key (to the right of the M key)
German ö The letter ö (O-Umlaut)
Hungarian 0 If you want the character 0 to appear in console input, you must press the one on your numeric keypad. Otherwise, the console will close.
Italian
Portuguese (Portugal)
\
Norwegian
Swiss
§
Portuguese (Brazil) '
Spanish º/ª
Turkish Q "
United Kingdom @

Another possible solution is to install AutoHotKey and set up a shortcut to send the tilde key code the game is expecting. Add the following lines to your AutoHotKey script and it will map F12 to grave accent (`) and Shift+F12 to tilde (~). (The grave accent key is the same physical key as tilde on US English keyboards.)

; Map grave accent/tilde key (`/~)
F12::SendEvent {vkC0sc029}
+F12::SendEvent +{vkC0sc029}

On some systems you may need to use the less optimal mapping:

; Map tilde key (~)
F12::~

The Console key can also be remapped by editing the file located in Data\Interface\Controls\PC\ControlMap.txt. By default the Console key is assigned the value 0x29 (DIK_GRAVE), changing to 0xb8 will assign it to the "Right Alt" key (DIK_RMENU). See a Direct Input Key (DIK) Code Table for other keys.

Commands[edit]

How to Read the Command Table

When a command requires arguments (e.g., additem <Item ID> <qty>), the brackets <> indicate that <ID> should be replaced with the appropriate ID, and <qty> with the appropriate quantity. The brackets are not part of the syntax. So additem <ID> <qty> becomes additem 00028A02 1.

Furthermore, all REFIDs, faction, weather etc can be entered without the leading zeros. (e.g. additem 28A02 1 has the same effect as above)

Command Effect Notes

Toggle Commands[edit]

These commands toggle settings on and off.
psb Unlock all powers psb is short for Player Spell Book.
s1st Shows 1st person model in 3rd person This only works in 3rd person. It shows your 1st person arms behind your character in 3rd person. You control the 3rd person model, but the 1st person arms mimic your swings. It looks like you're controlling a character that's controlling another character.
sucsm <number> Changes the speed of the free-flying camera (UFO cam) Example: sucsm 50 after typing tfc will allow the camera to move about five times faster than its default speed. The full command name is "SetUFOCamSpeedMult".
tai Toggle AI Toggles AI (Artificial Intelligence) processing off or on. This command is targeted; if no actor is selected it will turn off/on AI processing globally.
tb Toggle Borders Toggles cell border visibility. Borders appear as a thin white line on the terrain.
tc Toggle controls driven If used when highlighting an NPC, will transfer control to said NPC, but any command input will be passed in addition to the player unless player.tc is used to remove control.
tcai Toggle Combat AI Toggles Combat AI processing off or on.
tcl Toggle collision (clipping, noclip) Essentially, you can fly. Point in a direction and move wherever you want. You can also move through buildings and even the landscape. This command is targeted; if no actor is selected it will turn off collision for the player while keeping other actors stuck in place. It is possible to deselect any target reference by double clicking the same object or area in the landscape, which will cause "tcl" to default itself to target the player.
tdetect Toggle AI Detection Disables and enables AI detection, meaning if it is toggled off, NPCs won't be able to "see" you, or anyone else, even if you're right in front of them or attacking them.
tfc <1> Freeflying camera Sets your controls to move the camera around, instead of the player. Use with 3rd person view to get a good look at your character. Adding the "1" tag at the end freezes all the environment, but still allows you to move around with the camera.
tg Toggle grass Toggles display of grass.
tgm Toggle god mode No damage taken, no stamina used, no encumbrance, unlimited ammo, no cooldowns. You can only use this on yourself.

Note: God mode will not protect you from scripted damage.

tim Toggle immortal mode Everything behaves as normal except you cannot die as a result of being reduced to 0 health. You can only use this on yourself. If you are decapitated or bitten and thrown by a dragon while using this, it can have some quite frustrating results (e.g. you will walk around with your head cut off). These effects can be avoided by setting the character as essential.
tm Toggle menus (HUD) "Menus" refers to the Heads-Up Display (HUD) on the screen.. This also removes the cross-hair if it's present. This command is useful for taking screenshots without all the clutter.

Also see csb.

tmm <show?>(,<discovered?>,<includehidden?>) Show/hide all map markers <show?> should be 1 to show all markers, or 0 to hide all markers. Hiding markers hides all markers - including any markers available at the start of the game. When adding markers, the 2nd parameter <discovered?> determines if the ones you add are set as discovered (1, default) or not (0), and the 3rd parameter <includehidden?> is all (1) or all but hidden (0,default) (e.g., to add all undiscovered markers without fast travel, enter tmm 1,0,0).
tmove Toggle Player Movement Toggles ability of player to move.
ts Toggle sky Toggles display of the sky.
tscr Toggle script processing. Toggles script processing off or on globally.
twf Toggle wireframe Shows wireframe in red or opaque.

Targeted Commands[edit]

These commands require a target reference. Select one with the mouse in the console, use the prid command, prefix the command with player to target the player character or prefix the command with a RefID to target something else.
additem <item ID> <count> <flag (optional)> Give a character the specified amount of an item E.g., player.additem 002543B7 5 will add five sandwiches to your player's inventory. The effects of <flag> are unknown, but it probably refers to ownership and stolen status. Changes to an NPC's inventory will usually appear immediately if you're pickpocketing them when you open the console. It is possible to remove items with this command by using negative numbers.(Item ids: Starfield:Items)
addperk <perk ID> Give a character the selected perk For perk ID codes, see the page for the perk's corresponding skill, indexed at Skills. To find the perk ID code in-game, try help <perkname> 0.
addspell <spell ID> Needs to be tested with the power system.
addfac/addtofaction <faction ID> <faction rank> Add a character to a faction. Valid numbers for the faction rank vary, but 0 will always add the actor with the lowest possible faction rank and -1 will remove the actor from the faction.
advlevel Advance a character's level by one. advlevel Adds one level to your character's current level.
AdvSkill <skill> <nn> Advance the specified skill. Needs to be tested with the skill system.
amod<mod ID> Attach weapon/apparel mod For mod ID codes, see the page for each mods Crafting.
completequest <quest ID> Complete the quest/mission instantly. Be careful when using this command. Often, it merely makes the quest in the Journal become a completed quest. However, the related actors or NPCs to the quest may not recognize that you have completed a quest/task in order to give you a following quest/task. Quest IDs can be found in Starfield:Missions.
DamageActorValue <attribute> <nn> Damage value of attribute by <nn> amount Example: player.damageactorvalue health 50 causes you to lose 50 health as if you just took damage. It will still recover the same way it normally does. Attributes can become negative. Can be restored with restoreactorvalue. This is a better option than modAV for temporary debuffing, since it can be restored to its original value easier. Stacks with 'modAV' effects. Skills/attributes damaged with damageactorvalue will still appear white, but will correctly restore to what they really are. Can be used to kill NPCs.
Also see RestoreActorValue

The full list of attributes is provided at Actor Value Indices

disable Don't render the selected object (includes actors.) The object will be made invisible, collision will also be turned off and AI won't process on the object, but scripting on the object will run.
Also see enable
drop Force drop items from a character's inventory You may select a character and use the command Drop <base ID> <amount> to drop any items in their inventory by force, including normally undroppable items. You may need to use Showinventory to get a detailed list of items and get the correct IDs you need.
duplicateallitems <container/NPC refID> Duplicate all items in the targeted container and places them in the given container. Example: Selecting an NPC with the mouse then entering duplicateallitems 89c79 will copy all items in the NPC's inventory and place the duplicates into the container with refID 89c79. You can get the container/NPC's refID by clicking on them and committing the ID to memory before selecting the container/NPC which has the items you want to copy. You can also type in the refID of the container/NPC with the items to be copied before the command with a period in between instead of selecting anything with the mouse. For example, entering a2c94.duplicateallitems 89c79 will copy all items from Lydia's inventory (whose refID is a2c94) and place the duplicates into the container with the refID 89c79.
Also see removeallitems
enable Render the selected object (includes actors.) Undoes disable, making the object and its collision and AI appear in the world again.
Also see disable
equipitem <Item baseID> <0/1> <left/right> Equip selected NPC with Item With a selected NPC, you can typically use equipitem <Item ID> for use (if one is not already in their inventory, it will be added); the player-character equivalent is player.equipitem.
  • An optional extra parameter is 0 or 1: the latter seems to make the item not be unequippable (sometimes – the results are not entirely consistent), e.g. to keep a weapon drawn at all times; the default is 0, and leaves the item contextually unequippable (or resets it to be so, if 1 was used earlier).
  • A second optional parameter is left or right, which puts Item in a specific hand, if applicable; if this parameter is used, then 0 or 1 must precede it (usually 0).
  • It only works on baseIDs. Consequently, it will equip an item of that type already in inventory, or a create a new copy of the item if it is not already in inventory. You cannot use it to transfer a specific item from your inventory (or the ground, or a container) to an NPC.

The opposite command is unequipitem, and works with the same basic syntax.

forceAV <attribute> <nn> Force to modify the value of attribute ForceAV modifies the attribute value by registering a permanent modifier (positive or negative) of the amount required to force the attribute to the stated value. Displayed player attributes modified in this way will be highlighted (default is green text) to indicate a modifier ("buff" or "debuff") is being applied.
Also see modAV and setAV

The full list of attributes is provided at Actor Value Indices

getAV <attribute> Get value of attribute This will return the value of the specified attribute (a.k.a. actor value) for the specified target. You can select a target with the mouse, or enter the refID of the target followed by a period before the command. For a list of all of the actor values that can be used, see Actor Value Indices.
getAVinfo <attribute> Get value information of attribute This will print a short list of information about the given attribute (a.k.a. actor value) of the specified target. You can select a target with the mouse, or enter the refID of the target followed by a period before the command. For a list of all of the actor values that can be used, see Actor Value Indices.
getlevel <target> Get level of target Gets the level of the targeted character or creature.
GetLocationCleared <locationID> Check an area's clear code. 0 = not cleared, 1 = cleared. You must use the Template:CSList, not the name.
getrelationshiprank <target> Get the relationship rank of two actors. Should range from -4 to 4. See setrelationshiprank.
getstage <quest ID> Show the current active quest/mission stage. Shows the current stage that the quest is at based on the game's internal stage numbering.
hasperk <perk ID> Check if the selected actor has a perk with the selected ID For perk ID codes, see the page for the perk's corresponding skill, indexed at Skills. To find the perk ID code in-game, try help <perkname> 0.
incPCS <skill name> Increase the given skill to the next level.
kill <Actor ID (optional)> Kill the selected actor (NOT the optional Actor ID). Open the console, click on the actor you want to die, type kill and press Enter. Entering an optional Actor ID will treat that actor as the person who killed the target[verification needed], which can cause other NPCs to attack the actor as they would a murderer. Specifying the Player as the Actor ID will assign blame to the player, counting the kill as a murder if the target was non-hostile and possibly incurring a bounty if other NPCs witness the death.

Some actors (primarily NPCs, not creatures) can be flagged as "essential" by the game and thus will not die. In this case, the character will instead crouch and stumble around for a while; however, this stumbling can usually be ended early by using the resurrect command on him/her.

lock <level> Lock targeted object (i.e. door, container) with a difficulty of <level>. Values of <level> will display in the tooltip for the locked object as follows: 0 - 25: Apprentice, 26 - 50: Adept, 51 - 75: Expert, 76 - 100: Master, 101+: Requires Key.
MarkForDelete Delete an object. Deletes the targeted object the next time the area (cell) it resides in is reloaded. Useful for removing specific unwanted furniture/decoration from homes. Be careful as there's no way to restore deleted objects. Objects marked for delete will show [D] next to their ref ID if you re-target (re-click) them.
modAV <attribute> <nn> Modify value of attribute by <nn> amount ModAV modifies the attribute value by registering a permanent modifier (positive or negative) of the value stated. Displayed player attributes modified in this way will be highlighted (default is green text) to indicate a modifier ('buff' or 'debuff') is being applied.
Also see forceAV and setAV

The full list of attributes is provided at Actor Value Indices

moveto <actor ID> Move a character to specified actor and vice versa. You must use RefID

Example 2 - move an object or NPC to the Player: This code is especially useful for a follower/NPC who's just disappeared after a quest due to a bug in game. You can also select an object and type moveto player which will move the selected object to your feet and orient it based on the camera's angle.
Also see placeatme

movetoqt <quest ID> Move to quest target Using this code will instantly teleport you to the target (i.e., the marker on the map) of the quest. It does not advance the quest in and of itself, but may bring you into a situation which might immediately do so. It takes you to the ultimate current target of the quest in its respective cell - so it doesn't just take you to the next doorway you need to go through. It doesn't skip over to the final stage of the quest, either - you are delivered to the target of the current stage of the quest. Use caution, as you will be placed right on top of or as close to the current marker as possible, which may position you in the middle of a group of enemies, or on top of a trapdoor, etc. See the main index of Missions for the quest ID codes.
openactorcontainer 1 Open a character's inventory. Opens selected NPC's inventory to allow the player to add/remove items as if it were any other container.
paycrimegold (<jail?> <confiscate?> <faction ID>) Pay the bounty. Pay the bounty for the faction targeted NPC belongs to (the bounty gold will be removed from your inventory). The <jail?> parameter controls whether you are sent to jail: entering 1 means you will be teleported to the respective faction's jail (the default), entering 0 means you will stay put. The <confiscate?> parameter controls what happens to your stolen items: entering 1 means they are confiscated, entering 0 means you keep them (the default). If you don't specify either parameter, you will be sent to jail but keep your stolen items. The faction ID is only needed if you can't target an NPC. May also help in case guards attack you on sight.
placeatme <actor/object ID> Spawn specified actor or object at current position. Example: player.placeatme 000fea9b. Using this code will instantly summon an instance of an object or NPC at your position. The above example summons a dragon. Not recommended for named NPCs. This code uses the Object (base) ID and not specific reference ID as it is creating a new instance of that object/actor in the world; using it with named NPCs can result in duplicates unless the original was somehow removed.
Also see moveto which can summon named NPCs by refID using the following commands: prid RefID & moveto player
playidle <idle ID> Play an animation (idle) on the specified actor. Example: playidle IdleOffsetArmsCrossedStart. See the Template:CSList.
pushactoraway <actor ID> <number> Push an actor away in a random direction. Example: pushactoraway 14 1337. Will push or launch your character in a random direction. If you enter negative amount, example: pushactoraway 0001A6B8 -200, will pull the selected actor to your character position.
recycleactor <destination reference (optional)> Revive/Reset targeted NPC or object. Can be used to reset an NPCs reference/revive dead NPCs. If you've already looted a corpse, they may come back headless (especially Nords). Their inventory isn't reset, except for their weapon. Enemies will prioritize other NPCs of opposing factions (like Stormcloak vs Imperial), and ignore the player until the opposing NPCs are dead. The optional Destination Reference is untested, probably refers to coordinates or a cell id.
  • When used on containers, it acts like resetinventory.
  • When used on objects, it will reset them to their original positions and states. It can be convenient if you mess something up and want to restore the order.
  • When used on the player, their inventory is not replaced
removeallitems <actor or container ID> Remove all items from a character's inventory. E.g., player.removeallitems will remove all items from your character's inventory or "removeallitems <click on character> for remove all items of particular character. Optionally, after the command, enter the reference ID of an actor or container to transfer all the items in question into the referred actor/container.
Also see duplicateallitems
removeitem <item ID> <count> Remove the specified amount of an item from a character's inventory. E.g., player.removeitem 002543B7 5 will remove five sandwiches from your player's inventory. Changes to an NPC's inventory will usually appear immediately if you're pickpocketing them when you open the console.
removeperk <perk ID> Remove the specified perk from a character's skills. For perk ID codes, see the page for the perk's corresponding skill, indexed at Skills.

Note: Needs to be tested with the skill systems.

{{/Entry|removespell <spell ID>| | Needs to be tested with the power system.

resetAI Reset an NPC's AI. Can be used to calm down a non-enemy NPC if you attack them. In battle, the enemy is forced to sheath their weapon, then pull it out again and reacquire their target.
resethealth Restore a character to full health. Example: player.resethealth Restores your health to 100%
resetinventory Reset a container or a character's inventory. Resets a character's inventory to its default. Example: If you use removeallitems on an NPC and enter resetinventory everything will respawn and re-equip to its defaults. Can be used to pickpocket the same item multiple times. Works on dead NPCs and containers/chests, so you can loot the same corpse/container multiple times. Containers are slightly randomized, so items may vary depending on the containers loot settings.
RestoreActorValue <attribute> <nn> Restore the value of attribute by <nn> amount Restores a damaged skill or attribute up to its normal value. Example: lose 50 health and enter player.restoreactorvalue health 100 and you recover 50 health since it can't restore more than its normal value. Doesn't fix attributes/skills damaged by modAV or forceAV or setAV
Also see DamageActorValue

The full list of attributes is provided at Actor Value Indices

resurrect <1> Resurrect target actor Unless you use this command the instant the NPC is killed, the game will still register the target as "Dead" and they will subsequently not be mentioned in dialogue and sometimes specifically referred to as "Dead" during a quest. Adding a tag of "1" at the end (i.e., resurrect 1) will make the target get up instead of vanishing and reappearing, thus allowing them to keep their equipment. [verification needed — see talk page] If an NPC's corpse has vanished already, you will also need to enable the NPC. Using this on the player character will not dismiss the "Load last save?" screen, and the camera will behave as if you were still lying dead on the ground. However, if you use the resurrect command before the loading message appears, the player will revive, but the camera will be centered on the feet rather than the head. Note that accidentally using this command on yourself while you're still alive can also have unexpected consequences, among them losing the ability to dual-cast spells (which will be fixed on reload), and losing any blessing effects (but not the blessing itself - which can be complicated in the case of Standing Stones. The game will not let you restore that Standing Stone power unless you first visit another Standing Stone and come back.) NPCs who are dead at the beginning of the game (such as Mage) cannot be resurrected via this command.
Also see kill.
rmod<mod ID> Remove weapon/apparel mod For mod ID codes, see the page for each mods Crafting.
say <dialog topic ID> Makes the targeted actor say a specific dialog topic. Useful for forcing bugged NPCs to say a specific dialog topic if entering the dialog window is impossible for some reason. Any scripts for the dialog topic will also run as if the actor had said it normally. May have unintended effects if the dialog topic is invalid for that particular NPC.
setactoralpha <0–100> Change the selected actor's alpha/opacity. Useful for repairing unwanted graphic glitches after adding and removing certain permanent spell effects. E.g., player.setactoralpha 100 will reset unwanted invisibility effects and make your character visible again.
setAV <attribute> <nn> Set value of attribute SetAV sets the level value of the attribute to the stated value. Example: You can player.setav block 100 to set your Block to 100 and take advantage of having a high level Block without receiving any levels (and therefore any perks). The same works for dropping the skill level. You can also do it for Health, Stamina, or Magicka etc. And you can target it for an NPC by using prid <RefID> of an NPC first; then just type setav health 500 to give the specified NPC 500 Health. setav speedmult <nn> sets the speed percentage of the targeted actor to nn. You may need to sprint or sneak/unsneak for it to take effect.
Also see forceAV and modAV

The full list of attributes is provided at Actor Value Indices

setessential <base ID> <0 or 1> Set a character as mortal (0) or immortal (1). This command can be used to make any NPC unkillable. When a character set as essential takes nearly fatal damage, they collapse onto their hands and knees (Also known as Bleedout) and stumble around for a period of time, instead of dying.
Note that the base ID and not the ref ID must be used. The ref ID is what appears when clicking on an object with the console open. To find an NPC's base ID, however, you can either a) browse to their respective page (see: People and/or NPCs) or b) use the help function in-game to search for them by name, recording whatever value matches their name under the "NPC_" category of result. Once you have the base ID, enter the command using either 1 to set him/her immortal or 0 to set him/her mortal. For example, setessential a2c8e 1 would set Lydia as immortal.
  • Be careful when making an Essential NPC mortal, if they die you will likely be unable to access the associated quest or story. However, a simple save reload will fix if you haven't save over all the files where the character is still alive(and either non-essential or essential)
  • Related functions: To check whether an NPC is essential to begin with, select him/her in the console (so that the ref ID appears), and enter IsEssential - if the console returns "1.00", the NPC is essential.
  • It is also possible to set the player them self as essential with the base ID of 00000007, However upon entering the 'bleedout' stage, the player will sometimes not get back up (usually upon the first time in a new area or after having recently set yourself as essential), however, simply entering your inventory and drinking a health potion will fix this immediately (any health potion used during bleedout will return you to full health). Usually, your character will drop down to their hands and knees, and then immediately get back up with full health.
setghost <0 or 1> Set ghost mode for the targeted NPC. Makes the NPC immune to all combat mechanics such as melee attacks, spells, AOE, and shouts while active. The player can still collide with the NPC by running into them.
setgs <setting> <value> Set game setting. Doesn't seem to be preserved in saves; must be reset each time the game loads. Example: setgs fJumpHeightMin <height> sets the jump height for the player.
setlevel <multiplier> <modifier> <min> <max> Set NPC level Just like other target commands, type prid <RefID> of an actor/NPC first. If you prefer to click on the NPC while in the command console, make sure the ID you see is of the targeted NPC and not an object. You can set your own level with player.setlevel <value> where the value is the target level you desire

If you input setlevel 1000 0 1 100 that NPC will be equal level you are and will level with you up to level 100 and will start at level 1 if you're level 1.

Variable Description
<multiplier> Determines the base level in terms of the player's current level. Specified in tenths of a percent (i.e. 1000 means 100%, 500 means 50%).
<modifier> This number is added to the base level determined by <multiplier>. Can be negative or zero.
<min> The minimum level of the NPC (must be at least 1).
<max> The maximum level of the NPC.
SetLocationCleared <locationID> 1 Set whether an area has been cleared. You must use the Template:CSList; if you wish to clear Swindler's Den, for example, use 00018EE2, not the name. Also see GetLocationCleared.
setownership <ID> Sets ownership of the targeted item. You can set the owner of the targeted item with a faction ID or a character's base ID. If you don't add the parameter, the default owner would be yourself. This can be used to remove the "stolen" tag from any items. Simply drop the item on the ground, open the console, click on the item, and enter the command. It can be difficult to select certain items. Can also be used to remove the "owned" attribute of beds and gain the ownership of a stolen horse.
setplayerteammate <0 or 1> Sets the target to be a teammate of the player. Makes the current actor a teammate of the player (1) or removes their teammate status (0).
setrace <race> Needs to be tested.
setrelationshiprank <target> <#> Change the relationship between two actors 0=acquaintance, 1=friend, 2=confidant, 3=ally, 4=lover, -1=rival, -2=foe, -3=enemy, -4=archnemesis. (All other values are unassigned ranks and will default to "acquaintance".)
setscale <#> Scale size of target. Scales the size of a chosen target. Starting from small 0.1, normal 1, and 10 at max size. Acceptable targets can be any NPCs or objects in the world. You cannot change the size of items.
setstage <quest ID> <stage #> Set the current stage of the given quest. Example: setstage ms01 100. The setstage command is useful for advancing broken quests, finishing quests instantly, or for skipping ahead to a certain point in a quest. You can find the quest's ID code, as well as the various stages of the quests and their corresponding stage numbers, on the respective quest page. To start, see the main index of Quests.
setunconscious <integer> A value of 1 will be unconscious Example: setunconscious 1 makes an NPC or the player stand in place as if it's in a trance or their AI is disabled. You can do whatever you want to them and they won't react. They remain that way until you use setunconscious 0. They will act like nothing happened, so if you steal from them and wake them back up it will be as if they didn't see anything. They can also wake up if you get their health to a critical level, and will either fight back or run away. The effect is equivalent to the player using wait and coming out of it early due to an attack.
inv/showinventory Display the base IDs of every item in a character's inventory. These IDs can be used in the console to modify a character's or the player's inventory. E.g., with five Leeks in a person's inventory, player.showinventory will display "5 - Leek (000669A5)", and you can use player.additem 000669A5 5 to obtain five more leeks.
shp <parameter #1-parameter #9> Set HDR parameters The 9 HDR parameters are in floating point. Each one affects something different. The effects stay until you load a save or switch areas. Example: shp 1.00 0 0.50 0.01 9.00 .1 .99 100 1.0000
sifh <#> Set whether an actor should ignore friendly hits. E.g., sifh 1 will make the selected actor ignore friendly hits.
sqs <quest ID> Display stages of a quest Lists all stages of that quest and shows if a stage is achieved.
stopcombat Stop combat with a targetted NPC Stop all aggression from a NPC, if other NPCs in the faction are hostile, it will fight again
StopCombatAlarmOnActor Stops all aggression towards an actor. This is most useful when a group of otherwise friendly NPCs are attacking the player (i.e., player.StopCombatAlarmOnActor).
str <0–1.000000> Set the refraction value of the selected target. E.g., str 1.000000 will set refraction to its maximum value, str 0.000001 will make the target completely invisible, str 0.000000 turns off refraction reverting the target to its normal appearance. str 0.000000 will completely mess up a character's eyes and eyelashes. Can be used on any targetable object from NPC/player to pieces of the architecture.
teachword <word> Needs to be tested.
unequipitem <Item baseID> Unequip item from selected NPC With the selected NPC you can use unequipitem<ItemID> to get them to unequip an item but leave it in their inventory. The opposite command is equipitem, and works with the same basic syntax. No error results from unequipping an item the NPC doesn't have. The player-character equivalent command is player.unequipitem.
unlock Unlock the targeted object. Unlocks the targeted door, container, etc., including "Requires Key"-level locked objects.
unlockword <word> Unused.
modAngle <axis> <decimal> Changes the orientation of the object by <decimal> degrees on the <axis> axis (x, y, or z). This allows for easy alignment of an object in-place. E.g., modangle z -10. Allowed values are positive and negative integers or decimals. Tested down to 0.001 and up to around quadrillions for values. All reoriented as expected but things got "weird" when values too high were used, i.e. items started disappearing. A full rotation is only 360 degrees anyway!
modPos <axis> <decimal> Changes the position of the object by <decimal> distance on the <axis> axis (x, y, or z). This allows for easy positioning of an object in the world. E.g., modpos x 2. Allowed values are positive and negative integers or decimals. Tested down to 0.001 and up to 1 billion using getpos z. When operation was reversed (negative same amount), object did not come back down correctly and instead floated about 10m above the hab it started in.
getAngle <axis> Prints the given axis' angle value to the command console Makes it easy to see if an object is slightly off. E.g., getangle z next line prints: GetAngle: Z >> 90.00
getPos <axis> Prints the position of the object along the given axis to the command console Helps align objects seamlessly by matching values, assuming the angles are correctly set as well. E.g., getpos y next line prints: GetPos: Y >> 482.32
setAngle <axis> <decimal> Sets the orientation of the object to <decimal> degrees on the <axis> axis (x, y, or z). This allows for easy alignment of an object in-place. E.g., setangle y -10. Allowed values are positive and negative integers or decimals.
SetPos <axis> <decimal> Sets the position of the object to <decimal> on the <axis> axis (x, y, or z). This allows for easy positioning of an object in the world, mostly precise alignments. E.g., setpos z 5. Allowed values are positive and negative integers or decimals. Tested down to 0.01 from getpos.

Untargeted Commands[edit]

These commands do not require a target reference.
bat Execute a batch file Executes a .txt file with console commands in it, handy for certain otherwise tedious actions.
caqs Complete all quest stages Finishes every quest in the game, not just the ones you've started, essentially completing the game. Not recommended for general use. May crash your game. Note: This will unlock several quest related Steam achievements if they have not been unlocked yet. See also: saq
coc Transport to <cellname> Transports to the center of a named cell (coc is short for CenterOnCell.) You can get most location codes with the help location 0 command.

coc qasmoke will transport to the Starfield testing hall (for QA testing; inaccessible otherwise.)

cow Transports to cell <cell x, cell y> in <worldspace> Transports to the center of cell [cell x, cell y] in world space. (cow is short for CenterOnWorld.)
csb Clear screen blood Removes all blood from the screen. Useful when taking screenshots.
EnablePlayerControls <Movement> <Fighting> <POV> <Looking> <Sneaking> <Menu> <Activate> <Journal Tabs> <POV Type> Re-enables player controls Removes restrictions on player's control. Unlike the script command, this does not appear to allow controls to be disabled. Note: If used in carriage at the game start, unexpected bugs may occur or the game may crash.
fov It doesn't work, edit StarfieldCustom.ini instead.

Add this line to StarfieldCustom.ini inside Documents/MyGames/Starfield:
[Camera]
fFPWorldFOV=<angle>
fTPWorldFOV=<angle>

fw Force Weather Changes the current weather to the specified value (Note: Using this command will not permanently change the weather). It is only temporary, and will reset after some moving around. Typing ,1 after the formid without spaces will prolong the weather of your choice (for example, fw 10e1ec,1).
GetGlobalValue <Variable> Returns the value of a single global game setting. Example:GetGlobalValue DragonsReturned would tell you whether or not random dragon attacks will take place. See ShowGlobalVars.
GetInCellParam <Cell ID> <Object ID> Checks if an object is in a specified cell. Example:GetInCellParam 5de24 14 would tell you whether or not the player is in helgen keep. getincell >> 0.00= not present, 1.00=present. Can be used to confirm if your character or an NPC is in a particular cell.
GetPCMiscStat <Stat> Returns the value of the (typically meaningless) stats shown in the ESC menu. Shorthand is GetPCMS. Example: GetPCMS "barters" would tell you how many times you've gone shopping or GetPCMS "days as a werewolf" will tell you how many days you have been a werewolf. The quotation marks are required in the command to properly identify multiword stat IDs.
help Returns the IDs of all items, spells, game settings, etc. which have the entered text in their name. This is a useful command to find the item ID of an object, which can then be used with other console commands.

E.g., help "Daedric" will list all items, etc. which have "Daedric" in their name. There is no need to put a "0" for the help command. Quotation marks are required for queries of more than one word (e.g., help "ancient nord"). Use page up and page down to scroll through the results.

killallactors Kill all actors. Kills all loaded (in currently rendered cells) non-essential actors (NPCs and creatures) immediately. Essential actors will be knocked down. The code killall can be used for identical effect.
load Loads <name> gamesave. Loads the corresponding save. E.g.: load autosave1 will load last autosave. If the name contains spaces, it must be enclosed in double-quotes, E.g.: load "My Starfield Save"

Useful when stuck, or if showracemenu is opened. See also: save

ModPCMiscStat <Stat> <nn> Adjusts the value of the (typically meaningless) stats shown in the ESC menu by <nn> amount. Shorthand is ModPCMS. Modifies the Player Character Miscellaneous Statistic value by registering a permanent modifier (positive or negative) of the value stated. Example: ModPCMS "days as a werewolf" -100 will modify how many days you have been a werewolf by a negative 100. The quotation marks are required in the command to properly identify multiword stat IDs.
passtime <hour> Pass time for x hour Unlike sleep, this will not heal you
pcb Purge cell buffer This will free up used memory, often times increasing fps after any given amount of time in game. Best used while in interior cells. However, since it purges cached cells, any cells you visited in the recent past will have to be reloaded completely when reentered.
prid <RefID> Pick reference by ID Select an existing copy of an object/creature/NPC using its reference FormID (the one associated with that particular placed object). All subsequent targeted commands will use this object as the target. This is the same as clicking on the object in the console, but can be used even if the object is invisible or in a different area. Shorthand for PickReferenceID
qqq Fast quit. Quits Starfield to desktop immediately without further prompting. This sometimes results in crashing or mouse click problems. Mouse problems can be resolved by re-opening and closing Starfield.
resetinterior <cellID> Reset an entire cell. This command will reset an entire dungeon or location to default, including monsters, traps, chests and loot. E.g., ResetInterior Stillborncave01 or ResetInterior 00015206 would reset the dungeon Stillborn Cave to default; all monsters, traps, and loot would be respawned. If you reset a cell you have just been to, you'll need to use pcb command (purge cell buffer) as well, or the game will reload the buffered version of the cell, with all the modifications you've made to it. Both Template:CSList and Template:CSList are acceptable in this command. Using this command in player homes appears to reset the furnishings without clearing the contents of initially empty containers, however, all weapon racks and cases will be empty and mannequins will need to have their inventories removed and replaced. (viz., the bedroom chest)[verification needed]
refini Refreshes all settings. This command loads and re-applies all settings from Starfield.ini and any .ini with filenames matching currently loaded .esp files.
resetquest <quest ID> Reset a quest. This command will reset a quest. This command will set all stages of the quest to 0.
saq Start all quests Begins every quest in the game and adds them all to your journal. Not recommended for non-experimental use due to the large number of quests. May crash your game. Note: This will unlock several quest related Steam achievements if they have not been unlocked yet. See also: caqs
save Write <name> gamesave. Save game to a named save <name>. If the name contains spaces, it must be enclosed in double-quotes, i.e. save "My Starfield Save" Note that this will overwrite an existing save of <name> without prompting.

Appending the parameter "1" will create a file <name>.ess.txt and open a texteditor upon it. This textfile contains a lot of dumped data and takes a while to write out (15 minutes observed) - the console and game is unresponsive during that. See also: load

saveini Save settings to file. This command saves all current settings to an ini file in the Data folder. The file will be named after the last loaded plugin, and will thereafter only automatically load if that plugin is included in the load order.
set <Global Variable> to <Value> Sets a global variable Sets the value for a global variable. See ShowGlobalVars.
SetOrbitSpeedScale <value> Sets global orbal The higher the value the faster your ship will orbit in space, making the planet rotate faster
setpqv <quest form ID> <quest variable ID> <desired variable> Sets a quest variable Sets the quest variable to something else, typically either true/false or a number. Works only on boolean ( or int ) variables ! Use the sqv command to check all the current quest variables for a quest ( setpqv does not work on most types )

Example: setpqv DLC1NPCMentalModel LockedIn_var False

SexChange Switches the player or an NPC's gender Switches the player's gender; does not require a value. Can be used on an NPC if you target them. A fun thing to note is that this code does not change the face and voice of a character. Can be used on mannequins to show female outfits. It is possible to use this command to fix the lingering sound effect bug that some characters seem to suffer, just remember to use the command twice to return to your original gender.
SGTM Changes the Gametime Multiplier to a specified value for slow motion, and fast forward type effects Allows you to control the gamespeed, making it easier to capture screenshots of action on slower speeds. Causes issues above 2.0 and below 0.10, except when 0. This is different from timescale as timescale does not affect combat and movement and dialog where this setting does. Example: sgtm 2 will make the game run in fastforward.
ShowGlobalVars Shows all current game variables This will list all current game variables, which can then be changed with the set command. You can scroll through the list with the PgUp and PgDown keys.
ShowMessage Shows a message E.g., ShowMessage 000A81FF will display the "Playtesting Temporary Message".

showlooksmenu


showmenu <menu name> Shows game menu Ie: showmenu sleepwaitmenu will show the wait/sleep menu without bed/chair.
slm player <preset ID> Open character creation This will allows you to change not only player look but also background and traits. The player can have multiple background and the starting skills will also increased. Traits still limited to maximum of 3.
spf <file name> Save PC Face Saves the player face i.e. slider settings in showracemenu into a text file in your Starfield folder, which can be later imported into Creation Kit. Do not use any file extension, .npc will be added automatically.
sqo Itemizes quest objectives and their states Shows a human friendly list of active and completed quest objectives for currently active quests
sqt List quest ids and targets List all active quest IDs and their targets. Useful for finding the "quest ID" parameter for targeted quest commands such as movetoqt <Quest ID>
sqv <quest ID> Show quest variables Check all the "quest ID" quest variables. Use the setpqv command to modify a variable.
stp <unknown1> <unknown2> <unknown3> <chroma> Set tint parameters The chroma value ranges from 0 to 1 and is inverted, so stp 1 1 1 1 produces a black & white image, while stp 1 1 1 0 disables tint filtering altogether.

All Known Commands[edit]

Table of Commands
Command Short Command Notes
Console Commands
Abs
Actor Actor Toggle Actor Info
AddDecal
AddFaceAnimNote AFAN
AddFlames
AddFormToFormList
AddFormToLeveledList
AddItem Specify the form ID of an item to create in the target reference's inventory, and the quantity to add. You can also specify an optional flag value, though its purpose is unknown.
AddMusic
AddNote AN
AddOcclusionPlane AOP Add Occlusion plane (x size, y size).
AddPerk Specify the form ID of a perk to add to the target reference, if it is an actor.
AddShout
AddSpell Specify the form ID of a spell to add to the target reference, if it is an actor.
AddToContainer
AddToFaction Addfac
AddToMap
AddTopic
AddWatchAddress awa Adds an address range to watch out for.
AdvancePCLevel AdvLevel
AdvancePCSkill AdvSkill Give the player the given amount of skill usage
ApplyHavokImpulse
ApplyImageSpaceModifier imod Adds an imagespace modifier to the active list
ApplyImageSpaceModifierCrossFade imodcf Adds a crossfade imagespace modifier to the active list
AttachAshPile
AttachPapyrusScript APS Attaches a Papyrus script to the target reference. Specify the name of the script to attach, and a second optional string (a function to call on the script?).
AutoDisplayObjectives
Autosave
BetaComment BC Add comment to [General] 'sBetaCommentFile' file. NOTE: select object first. [bc "This rock is too high."]. This function has no implementation and is unused.
CalcLowPathToPoint LP2P ignore locks, allow disabled doors, ignore min use
CameraShake
CanHaveFlames
CanPayCrimeGold
Cast
CastImmediateOnSelf cios
CellInfo Toggle Cell Info
CenterOnCell COC Instantly move the player to the specified cell (by editor ID).
CenterOnExterior COE
CenterOnWorld COW Instantly move the player to the specified cell in a worldspace. [COW worldname -10 5]
CheckMemory chkmem In release builds of Starfield, this command is a no-op and does absolutely nothing.
CheckPlayerDoors CheckPD
ClearActorsFactionsPlayerEnemyFlag
ClearAdaptedLight cal Clears the HDR adapted light texture
ClearArrestState
ClearConsole Clears the console log
ClearDestruction
ClearFactionPlayerEnemyFlag
ClearLocationMarkers clm
ClearNoActivationSound Clear the activation failure sound
ClearOwnership
ClearQuestAliases Clears quest aliases. [ClearQuestAliases QuestID]
ClearScreenBlood csb Clear screen blood
CloseFile
CollisionMesh colmesh Toggle Mesh Collision Info
CompleteAllObjectives Complete all of a quest's objectives
CompleteAllQuestStages caqs Sets all quest stages
CompleteQuest
CopySaves Copy save games from the host machine or a memory stick (ms).
Cos
CreateDetectionEvent
CreateEvent
CreateGameData Creates game data.
CreateSaveData createsaves Creates save data.
CSize Shrink/Grow an actor. [player.shrink 0.0 or radius]
DamageActorValue DamageAV Damage an actor value.
DamageObject do
DebugCombatBehavior dcb Debugs the combat behavior on an actor
Disable
DisableAllActors DisAA
DisableAllMines
DisableLinkedPathPoints
DisablePlayerControls dpc
DispelAllSpells
DisplayGraphVariable dgv Gives control of variable filters used on the animation debug text page.
DisplayLookIKDebug dlik
DoesNotExist
DoTrap
DrawSkeleton das Enables skeleton drawing
Drop
DropMe
DualCast
DumpMasterFileSeekData
DumpModelMap DMM Dump model map contents to file
DumpNiUpdates dnu Dumps the next frame's calls to NiNode/NiAVObject::UpdateDownwardPass to NiDump*.xls (only Debug/PIX 360 builds)
DumpPapyrusStacks dps Dumps all Papyrus stack information to the log
DumpPapyrusUpdates dpu Dumps all Papyrus update registrations to the log
DumpTexturePalette DTP Dump texture palette contents to file param is sort type f-filename, s-size, c-count)
DuplicateAllItems
DuplicateNPCStats
EffectWasDualCast
EmptyRefAlias
Enable
EnableFast
EnableFastTravel
EnableLinkedPathPoints
EnablePlayerControls epc ​fighting|​pov|​looking|​sneaking|​menu|​activate|​journal|POV Type
ex: 1 0 0 1 0 0 0 0 0
EnableRumble
EnableStoryManagerLogging esml Enable story manager logging.
EnterTrigger
EPAlchemyEffectHasKeyword
EPAlchemyGetMakingPoison
EPMagic_SpellHasKeyword
EPMagic_SpellHasSkill
EPModSkillUsage_AdvanceObjectHasKeyword
EPModSkillUsage_IsAdvanceAction
EPModSkillUsage_IsAdvanceSkill
EPTemperingItemHasKeyword
EPTemperingItemIsEnchanted
EquipItem Force the target reference to equip the specified item (by form ID), creating that item in the reference's inventory if none is available.
EquipObject
EquipShout
EquipSpell
EssentialDeathReload
EvalActorTextures EAT
EvaluatePackage evp
EvaluateSpellConditions esc
Exists
ExitGame exit
ExportInventoryItemInfo eiii
ExportPerfTrackingData EPTD Export performance monitor tracking data to a file.
FadeSFX FSFX
FailAllObjectives Fail all of a quest's objectives
Family
FastTravel Player Fast Travel to Marker
FindForm find Find a form
FireWeapon
ForceActorValue ForceAV Does modav XXX (value - getav XXX). [player.forceav luck 25]
ForceFileCache ffc Enumerates Miles samples and streams
ForceFlee Flee Forces a actor to flee if destination or cell is passed in uses them
ForceLocIntoAlias
ForceRadioStationUpdate FRSU
ForceRefIntoAlias
ForceSave
ForceWeather fw Forces the active weather to the specified type, without transition.
FreezeRenderAccumulation fra only re-render geometry visible during this frame
GameComment GC Adds a comment about the game to the GameCommentDB. (Ex. This monster is too hard)
GetActionRef getAR
GetActivationHeight
GetActorAggroRadiusViolated
GetActorCrimePlayerEnemy
GetActorsInHigh
GetActorValue GetAV Get an actor value. [player.getav luck]
GetActorValueInfo GetAVInfo Get detailed an actor value info. [player.getav luck]
GetActorValuePercent
GetAlarmed
GetAliasedRef
GetAllowWorldInteractions
GetAmountSoldStolen
GetAngle Returns the angle of an object. [GetAngle (x,y,z)]. An object must be selected in the console to return a result.
GetAnimAction Return the actor's current anim action.
GetArrestedState
GetArrestingActor
GetAttacked
GetAttackState 0 = None, 1 = Draw, 2 = Swing, 3 = Hit, 4 = Next Attack, 5 = Follow Through, 6 = Bash
GetBaseActorValue GetBaseAV Get a base actor value.
GetBribeAmount
GetBribeSuccess
GetButtonPressed
GetCannibal
GetCauseofDeath What killed the actor
GetClassDefaultMatch
GetClothingValue
GetCombatGroupMemberCount gcgmc
GetCombatState
GetCombatTarget
GetCombatTargetHasKeyword gcthk
GetConcussed
GetContainer
GetCrime
GetCrimeGold
GetCrimeGoldNonviolent getnonviolent
GetCrimeGoldViolent getviolent
GetCrimeKnown
GetCurrentAIPackage
GetCurrentAIProcedure
GetCurrentCastingType getcasting
GetCurrentDeliveryType getdelivery
GetCurrentShoutVariation
GetCurrentTime
GetCurrentWeatherPercent getweatherpct
GetDayOfWeek
GetDaysInJail
GetDead
GetDeadCount
GetDefaultOpen Returns 1 if this object is open by default.
GetDestroyed
GetDestructionStage
GetDetected
GetDialogueEmotion
GetDialogueEmotionValue
GetDisabled
GetDisease
GetDistance
GetDistanceFromActorsPath GDFAP Prints out the distance from a reference to an actor's path.
GetEquipped
GetEquippedItemType
GetEquippedShout
GetEventData
GetFactionCombatReaction
GetFactionRank
GetFactionRankDifference
GetFactionReaction
GetFactionRelation
GetFlyingState
GetForceRun
GetForceSneak
GetFriendHit
GetFurnitureMarkerID
GetGameSetting
GetGiftGivenValue
GetGlobalValue
GetGold
GetGraphVariableFloat
GetGraphVariableInt
GetGroupMemberCount
GetGroupTargetCount
GetGS
GetHasNote GetN
GetHeadingAngle
GetHealthPercentage
GetHighestRelationshipRank
GetHitLocation What BGSBodyPart::LIMB_ENUM was hit. -1 = none, 0 = torso, ...
GetIdleDoneOnce
GetIgnoreCrime
GetIgnoreFriendlyHits gifh See if an actor is ignoring friendly hits
GetInCell
GetInCellParam
GetInContainer
GetInCurrentLoc
GetInCurrentLocAlias
GetInCurrentLocFormList
GetInFaction
GetInfamy
GetInfamyNonViolent
GetInfamyViolent
GetINISetting GetINI "setting:category"
GetInSameCell
GetInSharedCrimeFaction
GetIntimidateSuccess
GetInWorldspace
GetInZone
GetIsAlerted
GetIsAliasRef
GetIsAlignment
GetIsClass
GetIsClassDefault
GetIsCrashLandRequest
GetIsCreature
GetIsCreatureType
GetIsCrimeFaction
GetIsCurrentPackage
GetIsCurrentWeather getweather
GetIsEditorLocAlias
GetIsEditorLocation
GetIsFlying
GetIsFormType
GetIsGhost Returns the "ghost" flag on the targeted actor, which makes projectiles and attacks pass through the actor without affecting it.
GetIsHastyLandRequest
GetIsID
GetIsInjured
GetIsLockBroken
GetIsObjectType
GetIsPlayableRace
GetIsRace
GetIsReference
GetIsSex
GetIsUsedItem
GetIsUsedItemEquipType
GetIsUsedItemType
GetIsVoiceType
GetItemCount
GetItemHealthPercent
GetKeywordDataForAlias
GetKeywordDataForCurrentLocation
GetKeywordDataForLocation
GetKeywordItemCount
GetKillingBlowLimb Which BGSBodyPart::LIMB_ENUM received the killing blow
GetKnockedState
GetKnockStateEnum
GetLastBumpDirection
GetLastHitCritical
GetLastPlayerAction
GetLevel
GetLeveledEncounterValue
GetLightLevel gll Returns the "light level" value of the targeted reference, if it is an actor. This value represents how bright or shadowed the actor's position is, and it's used to handle detection and stealth.
GetLineOfSight
GetLinkedRef
GetLocAliasRefTypeAliveCount
GetLocAliasRefTypeDeadCount
GetLocationAliasCleared
GetLocationCleared
GetLocked
GetLockLevel
GetLOS
GetLowestRelationshipRank
GetMapMarkerVisible
GetMovementDirection
GetMovementSpeed
GetNoBleedoutRecovery
GetNoRumors
GetNumericPackageData
GetObjectiveCompleted Get objective completion status: 0 = off, 1 = on
GetObjectiveDisplayed Get objective displayed status: 0 = off, 1 = on
GetObjectiveFailed
GetOffersServicesNow
GetOpenState
GetPackageTarget
GetPairedAnimation GPA See if this reference is currently playing a paired animation.
GetParentRef
GetPathingCurrentSpeed
GetPathingCurrentSpeedAngle
GetPathingTargetAngleOffset
GetPathingTargetOffset
GetPathingTargetSpeed
GetPathingTargetSpeedAngle
GetPCEnemyofFaction
GetPCExpelled
GetPCFactionAttack
GetPCFactionMurder
GetPCInFaction
GetPCIsClass
GetPCIsRace
GetPCIsSex
GetPCMiscStat
GetPCMS
GetPCSleepHours
GetPermanentActorValue
GetPermAV Get an actor value ignoring temporary modifiers. [player.getav luck]
GetPersuasionNumber
GetPlantedExplosive
GetPlayerAction
GetPlayerControlsDisabled gpc ​fighting|​pov|​looking|​sneaking|​menu|​activate|journal
ex: 1 0 0 1 0 0 0 0
GetPlayerGrabbedRef
GetPlayerTeammate
GetPlayerTeammateCount
GetPos Returns the position of an object. [GetPos (x,y,z)]. An object must be selected in the console to return a result.
GetQuestCompleted GetQC
GetQuestRunning GetQR Returns 1 if quest is currently running, 0 if quest is not. GetQR [QuestID]
GetQuestVariable
GetRandomPercent
GetRealHoursPassed
GetReceivedGiftValue
GetRefTypeAliveCount
GetRefTypeDeadCount
GetRelationshipRank
GetRelativeAngle
GetReplacedItemType
GetRestrained Returns 1 if is restrained.
Gets Velocity on a reference
GetScale
GetScriptVariable
GetSecondsPassed
GetSelf this
GetShouldAttack
GetShouldHelp
GetSitting
GetSleeping
GetSpellUsageNum
GetStage
GetStageDone
GetStamina
GetStaminaPercentage
GetStartingAngle
GetStartingPos
GetStolenItemValue
GetStolenItemValueNoCrime
GetTalkedToPC
GetTalkedToPCParam
GetTargetHeight Get the delta on z between two references
GetThreatRatio
GetTimeDead
GetTotalPersuasionNumber
GetTrespassWarningLevel
GetUnconscious Returns 1 if is unconscious.
GetVampireFeed
GetVATSBackAreaFree
GetVATSBackTargetVisible
GetVATSFrontAreaFree
GetVATSFrontTargetVisible
GetVATSLeftAreaFree
GetVATSLeftTargetVisible
GetVATSMode
GetVATSRightAreaFree
GetVATSRightTargetVisible
GetVatsTargetHeight
GetVATSValue
GetVelocity
GetVMQuestVariable
GetVMScriptVariable
GetWalk
GetWalkSpeed
GetWantBlocking
GetWeaponAnimType
GetWindSpeed
GetWithinDistance
GetWithinPackageLocation
GetXPForNextLevel
GoToJail
HasAssociationType
HasAssociationTypeAny
HasBeenEaten
HasBoundWeaponEquipped
HasEquippedSpell hasspell
HasFamilyRelationship
HasFamilyRelationshipAny
HasFlames
HasKeyword
HasLinkedRef
HasLoaded3D
HasMagicEffect
HasMagicEffectKeyword
HasParentRelationship
HasPerk
HasRefType
HasSameEditorLocAsRef
HasSameEditorLocAsRefAlias
HasShout
HasSpell
HasTwoHandedWeaponEquipped
HavokVDBCapture vdbcapture Havok VDB Capture
Help Show this help.
HideMenu Hide or close a menu by name.
IgnoreRenderPass irp Ignore the given renderpass
IncrementPCSkill IncPCS Increase the player's skill by one point.
InstallMemoryTracker IMT Install Memory Tracker
InterruptCast
IsActionRef
IsActor
IsActorAVictim
IsActorsAIOff
IsActorUsingATorch
IsAllowedToFly
IsAnimPlaying
IsAttacking
IsAttackType
IsBeingRidden
IsBleedingOut
IsBribedbyPlayer
IsCarryable
IsCasting
IsCellOwner
IsChild
IsCloserToAThanB
IsCloudy
IsCombatTarget
IsCommandedActor
IsContinuingPackagePCNear
IsCurrentFurnitureObj
IsCurrentFurnitureRef
IsCurrentSpell
IsDualCasting
IsEnteringInteractionQuick
IsEssential
IsExitingInstant
IsExitingInteractionQuick
IsFacingUp
IsFleeing
IsFurnitureAnimType
IsFurnitureEntryType
IsGoreDisabled
IsGreetingPlayer
IsGuard
IsHorseStolen
IsHostileToActor
IsIdlePlaying
IsIgnoringCombat
IsImageSpaceActive
IsInCombat
IsInCriticalStage
IsInDangerousWater
IsInDialogueWithPlayer True if actor is currently in a dialogue state with player
IsInFavorState
IsInFriendStatewithPlayer
IsInFurnitureState
IsInInterior
IsInList
IsInMyOwnedCell
IsInSameCurrentLocAsRef
IsInSameCurrentLocAsRefAlias
IsInScene
IsIntimidatedbyPlayer
IsKiller
IsKillerObject
IsLastHostileActor
IsLastIdlePlayed
IsLeftUp
IsLimbGone Is BGSBodyPart::LIMB_ENUM been dismembered
IsLinkedTo
IsLocAliasLoaded
IsLocationLoaded
IsMoving Is the actor moving
IsNullPackageData
IsolateRendering ir
IsOwner get the ownership of the ref
IsParent
IsPathing
IsPC1stPerson pc1st Is the player playing in 1st person mode
IsPCAMurderer
IsPCSleeping
IsPlayerActionActive
IsPlayerGrabbedRef
IsPlayerInRegion
IsPlayerMovingIntoNewSpace
IsPlayersLastRiddenHorse
IsPleasant
IsPowerAttacking
IsProtected Check whether the target actor has the "protected" flag set. The flag prevents the actor from being killed by anyone but the player.
IsPS3
IsRaining
IsRecoiling
IsRidingHorse
IsRotating
IsRunning
IsSceneActionComplete
IsScenePackageRunning
IsScenePlaying
IsShieldOut
IsSmallBump
IsSneaking
IsSnowing
IsSpellTarget
IsStaggered
IsSwimming
IsTalking
IsTalkingActivatorActor
IsTimePassing
IsTorchOut
IsTrespassing
IsTurning Is the actor turning
IsUndead
IsUnique
IsUnlockedDoor
IsWaiting
IsWardState
IsWarningAbout
IsWaterObject Water condition used for drinking animation.
IsWeaponInList Is the current weapon in the form list
IsWeaponMagicOut
IsWeaponOut
IsWeaponSkillType
IsWin32
IsXBox
KillActor kill
KillAllActors killall
KillAllProjectiles kap Kill all projectiles
KillQuestUpdates KQU
KnockAreaEffect kae
LoadFlashMovie Loads a Flash movie for the GUI
LoadGame load LoadGame <filename>
LocAliasHasKeyword
LocAliasIsLocation
LocationHasKeyword
LocationHasRefType
Log
Look
LoopGroup
LTGraph Sets the input-to-player movement graph
MarkForDelete
MatchFaceGeometry
MatchRace
Memory Memory Toggle Memory Info
ModActorValue ModAV Modify an actor value. [player.modav luck, -10]
ModAmountSoldStolen
ModCrimeGold
ModFactionRank
ModFactionReaction
ModifyFaceGen mfg Modify FaceGen Functionality
ModifyGUIOverlay MGO Modifies a graphical overlay
ModPCMiscStat
ModPCMS
ModScale Modify the scale of an object
ModWaterShader mws Modifies water shader settings
MoveTo
MoveToMarker
MoveToQuestTarget movetoqt Move player to current quest target.
OpenActorContainer
OutputAllocations outalloc Output memory allocations (file, optional context name, optional start context, optional end context)
OutputArchiveProfile oap Output Archive profile info to a file
OutputMemContexts omc Output Mem Context info to a file
OutputMemStats oms Output Mem Stats info to a file
OutputMemStats omsfw Output Mem Stats info to a file
OutputTextureUseMap OTUM Writes out texture use map data to file.
Particles Particles Toggle Particle Info
PathToRef PTR Force actor to path to reference.
PayCrimeGold
PerformAction pa
PickIdle
PickRefByID PRID Select a reference by ID for the console.
PipboyRadio prad Control the Pipboy radio. Enable, Disable, Tune
PipBoyRadioOff
PlaceAtMe
PlaceLeveledActorAtMe
PlaceLocationMarker plm PlaceLocationMarker x y z (optional name) (optional color )
PlayBink
PlayerCreatePotion
PlayerEnchantObject
PlayerKnows
PlayerSpellBook psb Add all spells to player.
PlayExplosion Plays explosion seqiemce in selected object
PlayGroup IE: PlayGroup SEQNAME 1
PlayIdle Play this idle on the current actor.
PlayImpactEffect pie
PlayMagicEffectVisuals PME
PlayMagicShaderVisuals PMS
PlayReferenceEffect pre
PlayShaderParticleGeometry pspg
PlaySound Play a 2D sound. (Optional: 1 to indicate a system sound, 0 otherwise.
PlaySound3D
PlaySyncAnim syncanim Play Sync Anim
PlayTerrainEffect PTFX Plays a terrain effect at target REFR
PlayVATSCameras pvc Play this set of VATS cameras for the next VATS playback.
Polygons Polys Toggle Mesh Render Info
PrecomputedLOSDebug pld
PrecomputedLOSGeneration plg
PreloadMagicEffect
PrintHDRParam PHP Prints current HDR settings.
PrintNPCDialog pdialog Prints NPC dialog. This function has no implementation and is unused.
PrintQuestSceneInfo PrintS Prints to the Quest Inf file the current state of scenes.
Prints NPC dialog ShowSubtitle show all dialog subtitles (1 shows always, 0 hides always)
PrintShaderMacros PSM Given a shader and technique ID, prints the macros used to compile its shader.
PurgeCellBuffers pcb Forcibly unloads all unattached cells in cell buffers.
PushActorAway
Quest Quest Toggle Quest Event Info
QuitGame qqq Close TESV.exe immediately, without going through menus. (In very rare cases, the program may close slowly enough for you to see "Bye." logged to the console.)
RecvAnimEvent rae Simulate receiving an animation event from an animation graph.
RecycleActor Optional destination reference.
RefreshINI REFINI Refresh INI settings from file.
RefreshShaders RS Reload HLSL shaders from disk
RegisterPrefix RPRFX Register all resources at a path prefix.
ReleaseWeatherOverride rwo
ReloadCurrentClimate rcc Reloads values from the current climate
ReloadCurrentWeather rcw Reloads values from the current weather
RemoveAllItems
RemoveFlames
RemoveFromAllFactions
RemoveFromFaction Removefac
RemoveImageSpaceModifier rimod Removes an imagespace modifier from the active list
RemoveImageSpaceModifierCrossFade rimodcf Remove a crossfade imagespace modifier from the active list
RemoveItem Specify the form ID of an item to remove from the target reference's inventory, and the quantity to remove.
RemoveMe
RemoveMusic
RemoveNote RN
RemovePerk
RemoveSpell
RemoveWatchAddress rwa Removes an address range that we no longer want to watch.
RenderTestCell rtc runs Render Test on player's current parent cell
RenderTestHere rth runs Render Test on player's current position
Reset3DState
ResetAI
ResetDialogueFlags rdf Debug resets SayOnce, TalkedToPc, etc.
ResetFallDamageTimer
ResetHealth
ResetInterior
ResetInventory
ResetMemContexts rmc Reset Max Mem Contexts
ResetPerformanceTimers rpt Resets the performance timers
ResetQuest
ResetReference
RestoreActorValue RestoreAV Restore an actor value.
ResurrectActor resurrect
RevertFormList
RevertLeveledList
RevertWorld rw Revert the world
Rotate
RTGraph Sets the input-to-camera movement graph
RumbleManager RM
RunCellTest rct Runs a test that involves loading multiple cells in the background and timing how long it takes each of them to finish loading. However, the function used to log the results is a no-op, so it's impossible to view the results.
RunCompaction rcmpct Run a pass of compaction if possible.
RunConsoleBatch bat Run a console batch file
SameFaction
SameFactionAsPC
SameRace
SameRaceAsPC
SameSex
SameSexAsPC
SaveDebugTextPages SaveDTP Save Debug Text Pages settings to .ini file.
SaveGame save SaveGame <filename>
SaveHavokSnapshot SHS Saves a Havok snapshot of the hkpWorld the player is currently in
SaveIniFiles saveini Writes all the .ini files.
SavePCFace spf Saves the player's facial looks in an .NPC file. These can be used in the Creation kit to create an NPC with these facial looks.
SaveWorld Save hkWorld <filename>
Say
SayTo
SCAOnActor
ScriptEffectElapsedSeconds
SelectPlayerSpell spspell Equips a given power. First parameter Spell ID, same as addpower. Second parameter "Voice"
SendAnimEvent sae Send an event to the animation graph.
SendAssaultAlarm
SendSherlockDebugText ssdt
SendStealAlarm steal
SendTrespassAlarm
ServeTime
SetActorAlpha SAA
SetActorFullName
SetActorRefraction sar
SetActorsAI
SetActorValue SetAV Set an actor value. [player.setav luck, 75]
SetAlert
SetAllReachable
SetAllVisible
SetAlly
SetAngle Sets the angle of an object. [SetAngle (x,y,z)]. An object must be selected for the action to be taken.
SetAnimGraphVar sgv Set an animation graph variable.
SetAtStart
SetAudioMultithreading SAM
SetBloodParam SBP Set blood parameters.
SetBroadcastState
SetCameraFOV FOV Change the camera's field of view (in deg): default 75
SetCellFullName
SetCellImageSpace
SetCellOwnership
SetCellPublicFlag setpublic Set public flag on cell. [setpublic MyCell 1]
SetCinematicParam SCP Sets various values for the imagespace cinematics
SetClass
SetClipDist float, new clip distance
SetCombatStyle setcs
SetConsoleOuputFile scof Sets the given file as target for console output.
SetConsoleScopeQuest SSQ Sets the scope quest for all console functions. No param clears current scope quest.
SetCrimeFaction
SetCrimeGold Determines the actor's bounty. Player.SetCrimeGold <gold amount> <Faction ID>
SetCriticalStage
SetDebugQuest Sets the quest to be the only one startable for its event type.
SetDebugText sdt Sets which debug text is shown.
SetDefaultOpen A value of 1 will make the object open by default.
SetDestroyed
SetEmitterParticleMax Sets the maximum number of particles emitted by a non-master particle system emitter
SetEnemy
SetEssential Control the "essential" flag on an actor, preventing it from dying. Specify the base form ID of the actor and a flag value (0 or 1).
SetFaceTarget SFT Force actor to face a reference.
SetFactionRank
SetFactionReaction
SetFavorState
SetFog 2 floats, start and end depths
SetForceRun
SetForceSneak
SetFormKnown Sets the known flag on a form
SetFramebufferRange sfbr Set frambuffer range
SetGameSetting SetGS
SetGamma sg Sets new gamma ramp.
SetGhost Control the "ghost" flag on an actor, which causes projectiles and attacks to pass through it.
SetGlobalRadialBlur sgrb Set parameters for the global radial blur
SetGlobalTimeMultiplier sgtm
SetHDRParam SHP Sets various values for the HDR shader
SetHorseActor
SetHudGlowConstants shgc In release builds of Starfield, this command is a no-op and does absolutely nothing. It was originally intended to set parameters for HUD glow.
SetIgnoreFriendlyHits sifh Set whether an actor should ignore friendly hits (0 = no, 1 = yes)
SetImageSpace
SetImageSpaceGlow SISG In release builds of Starfield, this command is a no-op and does absolutely nothing.
SetImageSpaceModifiersEnable sisme Set imagespace modifiers enable: 0 = off, 1 = on
SetInChargen
SetINISetting SetINI "setting:category" value
SetItemValue
SetKeywordDataForAlias
SetKeywordDataForLocation
SetLastExtDoorActivated
SetLevel
SetLightingPasses SLP ​diff|​tex|spec
ex: 1010".
SetLocationAliasCleared
SetLocationCleared
SetLODObjectDistance SLOD
SetMaxAniso sma Sets Depth of Field focal distance
SetMeshLODLevel smll Sets Depth of Field range
SetMinimalUse
SetMPSParticleMax Sets the maximum number of particles emitted by master particle system emitter set
SetNoActivationSound Set the sound to play when activation fails (Sound)
SetNoAvoidance
SetNoBleedoutRecovery
SetNoRumors
SetNPCRadio snr Enable/Disable NPC radio playback: 0 = off, 1 = on
SetNPCWeight SNPCW [0–100]: Sets the weight of an NPC and reloads his 3D to visualize the weight change
SetObjectiveCompleted Set objective completion status: 0 = off, 1 = on
SetObjectiveDisplayed Set objective displayed status: 0 = off, 1 = on
SetObjectiveFailed
SetOpenState A value of 1 will make the object open.
SetOwnership
SetPackDuration SPDur
SetPapyrusQuestVar SETPQV Set a Papyrus property on the specified quest.
SetPapyrusVar SETPV Set a Papyrus property on the selected ref.
SetPathSprinting SPS Force actor to sprint.
SetPCEnemyofFaction
SetPCExpelled
SetPCFactionAttack
SetPCFactionMurder
SetPCSleepHours
SetPCToddler
SetPCYoung
SetPlayerAIDriven Control whether the player is in AI-driven mode: in AI-driven mode, the player-character can run AI packages, but the player loses almost all control of the character. Pass 0 or 1 as the value.
SetPlayerRace ShowRaceMenu no parameter will bring up the race menu. SetPlayerRace raceID will change the players race to raceID and reload the players geometry.
SetPlayerResistingArrest
SetPlayerTeammate
SetPos Sets the position of an object. [SetPos (x,y,z)]. An object must be selected for the action to be taken.
SetQuestAliases Set quest aliases. [SetQuestAliases QuestID]
SetQuestAliasLogging sqal Turns alias logging on/off for a quest.
SetQuestDelay
SetRace Sets the passed in actor's race.
SetRelationshipRank
SetRestrained A value of 1 will be restrained.
SetRigidBodyMass
SetRumble Creates rumble in the controller (left motor) (right motor) (duration)
SetScale Set the scale of an object
SetSceneIsComplex
SetShowQuestItems
SetSize
SetStackDepth SSD Set Stack Depth
SetStage
SetSubgraphToDebug sgd Subgraph To Debug
SetTalkingActivatorActor
SetTargetDOF stdof Sets the depth of field based on the target
SetTargetFalloff stfo Sets the falloff of the target
SetTargetRefraction str Sets the refractive value of the target
SetTaskThreadSleep Sets the task thread sleep value (-1 to disable).
SetTaskThreadUpdateSleep Sets the task thread update sleep value (-1 to disable).
SetTintParam STP Sets various values for the imagespace tint
SetTreeBranchAnimationRange STSBR Restrict the range of tree branch animations.
SetTreeBranchFlexibility STSBF Set the flexibility of trees branches.
SetTreeLeafAmplitude STSLAMP Set the amplitude of trees leaves.
SetTreeLeafFlexibility STSLF Set the flexibility of trees leaves.
SetTreeLeafFrequency STSLFRQ Set the frequency of trees leaves.
SetTreeMipmapBias stmb Set mipmap LOD bias values for tree billboards.
SetTreeTrunkFlexibility STSTF Set the flexibility of trees trunk.
SetTreeWindDirection STSWD Set the tree system wind direction.
SetTreeWindMagnitude STSWM Set the tree system wind magnitude.
SetTriLinearThreshold stlt Set the motion blur params
SetUFOCamSpeedMult sucsm Set speed mult for free camera.
SetUnconscious A value of 1 will be unconscious.
SetVATSTarget
SetWarning Params: Name [0/1]. 0 is default for 2nd param.
SetWeather sw Sets the active weather to the specified type
SetZoneRespawns
SexChange Change the targeted actor's sex. The change itself is made to the actor's base form, but only the targeted actor reference will be updated; other actors with the same base form will update when they are reloaded or their equipped armor changes.
ShouldAttackKill
Show TST Show global scripts and variables.
Show1stPerson S1ST Show the 1st person Model from the 3rd person camera. If in 3rd person mode it will show both.
ShowAllMapMarkers tmm Shows/hides map markers (1 shows, 0 hides)(1 travel(default), 0 no travel)(1 all, 0 all but hidden(default)).
ShowBarterMenu sbm
ShowClosestLocationForSphere SCLFS Finds the closest location where a sphere can fit in the navmesh, and displays it
ShowDialogSubtitles
ShowFullQuestLog SFQL Show all log entries for a single quest
ShowGlobalVars SGLV Show all global variables.
ShowHeadTrackTarget SHeadT Show the head track target if set from look function
ShowHighMaxHeights shmh
ShowInventory inv Shows reference inventory
ShowLockpickMenu slpm
ShowLockpickMenuDebug slpmd
ShowLowMaxHeights slmh
ShowMap
ShowMenu Show or create a menu
ShowMessage
ShowQuestAliases Show quest aliases. [ShowQuestAliases QuestID]
ShowQuestLog SQL Show Quest Log
ShowQuestObjectives SQO Shows the list of current quest objectives
ShowQuests SQ List quests.
ShowQuestStages SQS
ShowQuestTargets SQT Show current quest targets
ShowQuestVars SQV Show all Papyrus variables on the specified Quest. [sqv QuestID]
ShowRaceMenu
ShowRenderPasses srp display render passes for the next frame
ShowVars SV Show all Papyrus variables on the targeted reference. [player->sv]
ShowViewerStrings svs
ShowWarning - Sin
SoundCatMod scm In-game control of sound categories.
SpeakSound
SpellHasCastingPerk
SpellHasKeyword
Sqrt
StartAllQuests saq Starts all quests
StartCannibal
StartCombat
StartConversation Start a conversation [Bob.StartConversation Joe, SecretTopic]
StartMasterFileSeekData
StartMisterSandMan
StartPapyrusFormProfile StartPFP Starts profiling Papyrus scripts on a form.
StartPapyrusScriptProfile StartPSP Starts profiling a Papyrus script.
StartQuest
StartRadioConversation
StartScene
StartTrackPlayerDoors StartTPD
StopCombat
StopCombatAlarmOnActor
StopLook
StopMagicEffectVisuals SME
StopMagicShaderVisuals SMS
StopPapyrusFormProfile StopPFP Stops profiling Papyrus scripts on a form.
StopPapyrusScriptProfile StopPSP Stops profiling a Papyrus script.
StopQuest
StopReferenceEffect sre
StopScene
StopShaderParticleGeometry sspg
StopTrackPlayerDoors StopTPD
StopWaiting
Tan
TeachWord
TestCode
TestDegrade degrades the specified number of MB of textures. negative values degrade all possible. (only 360 builds)
TestHandleManagerWarnAndKillSDM THMWAKS In release builds of Starfield, this command is a no-op and does absolutely nothing. Its built-in description reads, "Purely for testing: lists every un-destroyed handle, then destroys it." This may refer to the internal "handle" system used to keep track of objects in the game world.
Textures tx Toggle Texture Info
Timing FPS Toggle Timing Info. This function has no implementation and is unused.
ToggleActorMover tam In release builds of Starfield, this command is a no-op and does absolutely nothing. It was originally intended to toggle actor movement through the pathing system.
ToggleActorsAI
ToggleAI TAI
ToggleAiSchedules TAIS
ToggleAnimations TANIM Toggles all actor animations
ToggleAnimatorCam animcam Toggles a 3rd-person camera mode designed for animators' ease-of-use
ToggleAudioOverlay TAO Toggle the Audio Debug Overlay.
ToggleBorders TB Show border lines for each cell.
ToggleBoundVisGeom tbvg Toggles bound visualization for a ref
ToggleCastShadows tsh
ToggleCellNode TCN Toggle 3D for a cell child node: 0 = actor, 1 = marker, 2 = land, 3 = water, 4 = static, 5 = active
ToggleCharControllerShape TCCS Toggle char controller shape type.
ToggleCollision TCL If a reference is targeted, attempts to toggle collision on the reference. Otherwise, toggles a global flag in memory, which disables player collision and gravity but can also break NPC physics and pathing.
ToggleCombatAI tcai Toggles ALL Combat AI
ToggleCombatDebug tcd Toggles combat debug info
ToggleCombatStats TCS
ToggleContextOverlay TCO Toggle the Context Overlay.
ToggleControlsDriven TC Toggles controls driven character
ToggleConversations TCONV Toggle conversation stats
ToggleDebugDecal TDD Toggle debug displays for decal creation : 0 = wireframe, 1 = solid, 2 = occlusion query, 3 = transform
ToggleDebugText TDT In release builds of Starfield, this command is a no-op and does absolutely nothing.
ToggleDecalRendering TDR Toggle decal rendering
ToggleDepthBias tdb toggles depth bias for decals on or off
ToggleDetection TDETECT
ToggleDetectionStats tds Show the detection stats of the current seletected Ref.
ToggleEmotions temo Toggle NPC facial emotions.
ToggleEOFImageSpace teofis Toggles end of frame imagespace effects
ToggleEventLog TEL Show a log of misc. events for the selected debug REFR.
ToggleFlyCam tfc Toggles the Free Fly camera (UFO cam).
ToggleFogOfWar TFOW Turns fog of war on or off.
ToggleFootIK tfik
ToggleFullHelp TFH Toggle Full Help
ToggleGodMode TGM Toggle God mode
ToggleGrabIK tgik Toggles Grab IK system
ToggleGrass TG Toggle grass display.
ToggleGUIOverlay TGO Toggles the graphical overlay
ToggleHeapTracking THT Toggle Heap Tracking
ToggleHighProcess THIGHPROCESS
ToggleImmortalMode TIM Toggle Immortal mode
ToggleLiteBrite tlb Toggles lite brite render mode.
ToggleLODLand TLL
ToggleLookIK tlik Toggles Look IK system
ToggleLowProcess TLOWPROCESS
ToggleMagicStats TMS

-

ToggleMapEffect TME
ToggleMenus TM Hide all the menus. Used for taking screen shots.
ToggleMiddleHighProcess TMHIGHPROCESS
ToggleMiddleLowProcess TMLOWPROCESS
ToggleMotionBlur tmb Toggle Motion Blur for the selected reference
ToggleMotionDriven TMD Toggles motion driven animation
ToggleMovement TMOVE Toggles all actor movement
ToggleNavmeshInfo tni toggle a view mode similar to the map camera and displays navmesh infos
ToggleOcclusion tocc toggle occlusion query for geometry
TogglePathingInfoFunction TPI Toggle pathing information.
TogglePoolTracking TPT Toggle Pool Tracking
ToggleRagdollAnim tra Toggles Ragdoll Anim system
ToggleRefractionDebug trd Toggles refraction debug render texture
Toggles Foot IK system SetVel Sets Velocity on a reference
ToggleScripts TSCR Turn Script processing on/off
ToggleShadowVolumes TSV
ToggleSky TS
ToggleSPUCulling tSPUC toggles the SPU culling on or off
ToggleSPUMovement tSPUM toggles the SPU movement on or off
ToggleSPURenderBatch tSPURB toggles the SPU render batch on or off
ToggleSPUTransformUpdate tSPUTU toggles the SPU transform update on or off
ToggleTestLight TTL Toggle test light (radius, magnitude).
ToggleTrees TT Turn trees on/off
ToggleWaterCurrentGeometry twcg
ToggleWaterRadius TWR
ToggleWaterSystem TWS Toggles the water system
ToggleWireframe TWF Show the world as wireframe.
TriggerHitShader ths
TriggerHUDShudder hudsh Trigger shudder effect on HUD. Params=Intensity/Duration.
TriggerScreenBlood tsb
UnequipAll
UnequipItem
UnEquipObject
UninstallMemoryTracker UMT Uninstall Memory Tracker
UnLock
UnlockWord
UnusedFunction1
UnusedFunction2
UnusedFunction3
UnusedFunction4
UnusedFunction5
UnusedFunction6
UpdateLevel Update the player's level based on current skill usage amounts.
UpdateQuestInstanceGlobal
UseWeapon
Wait
WakeUpPC
WasteMemory wm Allocates some memory (in MB).
WaterColor mwc Modifies water color
WornApparelHasKeywordCount
WornHasKeyword
EnableStoryManagerLogging
DumpPapyrusStacks (dps)
DumpPapyrusTimers
DumpPapyrusLOSEvents
DumpPapyrusDistanceEvents
DumpPapyrusPersistenceInfo (dppi)
DumpPapyrusEventRegistrations
RunCompaction
ToggleImmortalMode
SetSubgraphToDebug
EnableRumble
HavokVDBCapture
ToggleNavmeshInfo
PlaySyncAnim
SetFormKnown
SetDebugQuest
SetQuestAliasLogging
SetRace
FindForm (find)
StartPapyrusScriptProfile (StartPSP)
StopPapyrusScriptProfile (StopPSP)
StartPapyrusFormProfile (StartPFP)
StopPapyrusFormProfile (StopPFP)
StartPapyrusStackRootProfile
StopPapyrusStackRootProfile
TogglePapyrusGlobalProfiler (TPGP)
PrintQuestSceneInfo
IsInvulnerable
CollisionMesh
HavokWorldStep (hkstep)
IsolateRendering
ToggleWaterCurrentGeometry
PerformAction
StartTrackPlayerDoors
StopTrackPlayerDoors
CheckPlayerDoors
SetInChargen
ForceReset
ForceCloseFiles
HotLoadPlugin (HLP)
GenerateBendableSpline (Spline)
Reload ()
TestAim
TestLook
PushCamera
MoveToEditorCamera
MoveToEditorSelection
PlaceFurnitureTester (PFT)
DumpConditionsFunctions
ReloadAnimationGraphs
ToggleWeaponOverlay
ForceDetect
ChangeAnimArchetype (caa)
ChangeAnimFlavor
SetAngryWithPlayer
ForceRepath
ForcePathFailure
DumpFormList
TraceAnimationEvents
ShowMods
DumpInputEnableLayers
AttachMod
RemoveMod
SpawnTemplatedObject
CallFunction
CallQuestFunction (cqf)
CallGlobalFunction (cgf)
ResetInputEnableLayer
ForceEnablePlayerControls (fepc)
ResetForceEnabledPlayerControls
GetActorRefOwner
SetActorRefOwner (saro)
HasActorRefOwner (haro)
SetOutfit
PassTime
LinkLocations
ShowLinkedLocations
SetLinkedRef
ResetContainer
SetSceneForDebug
PreloadExterior
TestPath
ToggleControlsOverly
Refresh
DynamicResolution
TestLoadingMenu
RecalcInstanceData
ToggleReferencePose
SetPersistLocation
SetLocationRefType
ShowLocData
ReserveLoc
UpdateAwakeSound (UAS)
SetHarvested
PauseScene
SpawnDupe
DisableDistantReferences
FireAssert
ForcePersistent
PlayActionCamera (pac)
StopActionCamera
ChangeStance
AuditionWwiseEvent
AuditionReverbForm (arf)
SetWwiseState (sws)
BuildAnimationData (bad)
SwitchSkeleton
GetHelloorGreeting ()
SetBoneTintRegion
SendDialogueEvent
SetForceSpeechChallengeAlwaysSucceed ()
SetForceSpeechChallengeAlwaysFail ()
RunMaterialsAnalysis (rma)
CaptureMessages ()
ToggleTrijuice
SetPresentThreshold (spt)
LinkFullAccount
IsLoggedIn (isonline)
GetLegalDocs (getlegaldocs)
AcceptLegalDoc
GetDataAttachment
DeleteDataAttachment
UploadCharacterData
GetAttachmentLeaderboard (getattachmentleaderboard)
LoadUnitedData
MakeUnityNPC
SetVolumetricLighting Parameters (vl)
StartWorkshop (workshop)
ToggleVBlankOptim
AddKeyword
RemoveKeyword
SetAmbientParticlesEnabled
RemoveOutposts ()
SetESRAMSetup
CallStackTraceDepth
CommandedActivated
EnableGalaxyMode
ToggleStarFieldDebug
SetStarFieldCoordinateScale ()
SetStarSystemScale (sss)
MoveToPlanet
SetOrbitSpeedScale
InstanceNamingRules
GetOrbisModInfo
ToggleSceneDebug
SetFarClip
ToggleOverdraw
RecordScene
LandOnPlanet (lop)
TakeOffToSpace
PreviewBodyResources (pbr)
SendAffinityEvent
AddPower
RemovePower
MatlockCapture
ToggleSnapNodeMarkers
ToggleSnapNodeMarkers
SetVoiceType
AddWorldSpaceToPlanet
DebugDataProvider
LoadAll3D
PrintAllMenus (pam)
PrintAllInputContext (paic)
AddPlotToBody (AddPlot)
ReloadFaceData
SetGravityScale
PreviewBlock
ExportTerrainTextures
ExportTerrainGrids
ExportTerrainHeightMap
ExportTerrainSplatMap
ExportTerrainMaterialIndexMap
ExportTerrainFiles
UpdateTerrainClipmaps
ToggleDebugCamera
CyclePrevDebugCamera
CycleNextDebugCamera
ToggleDebugCameraControls
SetImGuiWindowFunction (siw)
InvokeUIEvent
HotReloadUI
SetPosRelativeToRef
FaceRef
SetWorkshopItem
GenerateNavMesh
LandOnPlanetAnimated
startNewGame
ForcedBleedout
ForceConditionFormTrue
ForceConditionFormFalse
LandOnPlanetBiome
LandOnPlanetMarker
TestAllPlanets
ClearLinkedRef
SetLocalTime
ReloadMaterials
PlacementOnCell
ToggleWorkshopFlyCam
CheckBiomeMarker
TestBiomePlanet (tbp)
PreviewPattern
SetHavokDynamic
SetHavokKinematic
SetHavokActive
SetHavokLOD
SetHavokLinearVelocity
SetHavokAngularVelocity
SetHavokCollisionLayer
SetHavokRagdollFriction
SetHavokParam
ShowHavokRagdollValues
StartHavokPartTest
StopHavokPartTest
SetOrientation
ToggleDebugText3D
ToggleBioOverlay
ToggleMetricViewer
PrintMessage
AddDebugTest
DisableActorPackage
StopBatchFile
CenterOnSpaceCell
DependencyGraphDump
ToggleExperimentalShaders
SetTestPlanetAndBiome

Using Batch Files with the bat Command[edit]

Starfield provides a simple batch file mechanism so you can customize your game play quickly and without repeatedly typing console commands.

Example: bat mybatchfile; runs all of the console commands in the file Starfield\mybatchfile or Starfield\Data\mybatchfile.txt. Notice that the file you put in Starfield directory mustn't have an extension, while the one in Starfield\Data needs a .TXT extension. The second option is preferable - first because you don't need to change file extension and second because it keeps the root directory clean. Also a file that goes to Data folder can be shipped along with mod and placed by all Mod Managers.

To use the feature you:

  • Create a text file that contains a list of console commands (one per line).
  • Place the file in your Starfield installation directory or in Starfield\Data.
  • Start the game.
  • Bring up the console.
  • Type bat followed by the name of your batch file, for example bat mybatchfile.

Starfield batch files are lists of console commands that are run one after the other. They have no loops, tests, or other logic and execution doesn't stop if there's a problem with one of the commands. You can create any number of batch files, each with its own purpose.

Guidelines for Using Commands in Batch Files[edit]

Most Starfield console commands can be run from a batch file. For example:

  • Toggle commands work in batch files. These include showing and hiding NPC conversation subtitles (ShowSubtitle), turning on and off grass display (TG), enabling and disabling god mode (TGM), and so forth.
  • Targeted commands with an explicit reference work fine.
  • PRID (Pick by Reference ID) selects an item, NPC, etc. Using PRID to select an NPC before performing additional commands that you want to apply to that NPC works fine.
  • Miscellaneous commands such as FOV or FW can also be run from batch files.
  • The COC command cannot be run from within a batch file (the game will crash to desktop). [verification needed — see talk page]

Guidelines for Location of Batch Files[edit]

Note that batch files can also be stored in your "Documents" user folder in Windows (for example: C:\Users\myUsername\Documents\My Games\Starfield). In fact, if you have batch files stored in the Starfield game directory and another batch file with the same filename in your "Documents\My Games\Starfield" directory, the batch file in your "Documents" folder will take precedent when attempting to call the bat [filename] command.